Connectors

Have you ever really needed an extra probe or cable badly, and after receiving it, found it had the wrong connector?

If the answer is yes, then this problem can be solved with a little help from you.

Over the years, this problem has occurred many times. We at Ludlum Measurements would like to prevent this misfortune from ever happening to you. However, we need your help to overcome this inconvenience.

We supply a series "C" type connector on all of our survey instruments, probes, and cables, unless otherwise requested by the customer. The series "C" is a larger style. Identifying the connectors is very simple; each connector has an identification number stamped on it which is usually readable. Listed below are a few of the most commonly used connectors and their identification numbers.

If these numbers do not appear on your connector(s) and you are still unsure of the type on your instrument, please feel free to call our sales department to assist you at any time. We will be glad to help you identify your connector(s) and probably help prevent untimely delays.