Lumic Calibration Kit

Part Number: 4519-865

Features

• Simplifies Reading and Writing Parameters
• Wizards for Calibration and Plateau Steps
• Includes Both Software Versions, 2 Cables, and Manuals

Lumic Calibration Software is a useful tool that allows the reading and writing of important parameters via a USB port in the Model 3000 Series and Model 30 family of instruments. Instrument parameters may be loaded or saved to files, and an instrument parameter report may be printed. The software also allows streaming and viewing of current readings and measurements of the instrument. All streamed readings and measurements are time stamped and may be saved to a CSV file for later viewing.

Two "wizard" features include a gamma exposure/dose calibration routine and an automatic plateau. The calibration routine wizard leads the user through calibration steps. The plateau wizard automatically records data at different detector voltages once the initial settings are input to determine the correct voltage for operation.

The Lumic Calibration Kit includes both versions 1.0 and 2.0 of the Lumic Calibration Software, as well as two USB cables, one for Model 3000 Series instruments and one for the Model 30 family of instruments. See the table below for the firmware requirements and the software version that can be used with each instrument.

Note: If you purchased the original Lumic 1.0 software, you are eligible for a free copy of Lumic 2.0. Please contact your local sales representative or Ludlum Measurements to receive your copy.