Waste Monitor - Model 375P-336
CE Seal

The Model 375P-336 is a Digital Model 375 Controller coupled to two 2753 cm (168 in) plastic scintillation detectors. These components are indoor units that are typically wall-mounted. This simple and cost-effective solution offers a simple system that is easy to operate and maintain. The controller supplies local alarms, but can also be connected to external alarms or even put onto an Ethernet network if desired. A 24-hour battery backup to keep the system operational in the event power is lost is included. See Model 375 for additional detail and available options.

Medical Application

This instrument is ideal for monitoring personnel or laundry for possible contamination in the nuclear medicine department. The monitor may also be used as a radiation contamination triage device to alert emergency department personnel of potentially contaminated patients or equipment coming into the emergency room. Ludlum Measurements encourages the use of an optional rail, Part Number 2311167, in those environments where equipment, carts, or other traffic might strike and damage the detectors.
Surface Contamination Inspection
Using hand held instruments for inspecting items can, in many cases, be too time-consuming. The Model 375P-336 allows a more rapid and uniform inspection by placing two relatively large scintillation detectors in proximity to the incoming or outgoing articles undergoing inspection. Both detectors are continuously monitored by the digital controller so any offending item can immediately trigger an alarm. Alarm conditions can be set up to automatically halt production conveyance devices, notify the central office, and even alert key personnel to initiate an immediate response.